IEC 61123-1:1991, 可靠度試驗-成功比符合性試驗方案

hlperng

IEC 61123-1:1991, 可靠度試驗-成功比符合性試驗方案 (IEC 61123-1:1991, Reliability Testing - Compliance Test Plans for Success Ratio)

出版歷史：

• ed 1.0, 1991-12-24 (Stability Date: 2018), total 35 pages in English version.
  

Abstract：
Specifies procedures for applying and preparing compliance test plans for success ratio or failure ratio. The procedures are based on the assumption that each trial is statistically independent. Supersedes IEC 60605-5 and its amendment 1.

從IEC官網下載IEC 61123:1991目錄

Table of Contents

1. Scope
2. Normative References
3. Other References
4. Definitions
5. List of Symbols

6. Application
    6.1 Reliability Requirements
    6.2 Repair and Replacement
    6.3 Types of Test Plans
    6.4 General Test Procedure

7. General Decision Criteria

8. Truncated Sequential Test Plans
    8.1 Characteristics
    8.2 Decision Criteria
    8.3 Operating Characteristic Curve
    8.4 Expected Number of Trials to Decision

9. Fixed Trial/Failure Terminated Test Plans
    9.1 Characteristics
    9.2 Decision Criteria

10. Design of Trial or Failure Terminated Test Plans
     10.1 Characteristics
     10.2 Approach
     10.3 Common Case
     10.4 Other Cases
     10.5 Examples of Application
     10.6 Procedure to Determine D and c or n and c
     10.7 Decision Criteria

Annexes
    Annex A. Additional Information on Sequential Test Plans
    Annex B. Design of Trial or Failure Terminated Tes Plans - Examples
    Annex C. Design of Trial or Failure Terminated Test Plans - Mathematical Procedures and Formulas