IEC 60300：可恃性管理國際標準系列

hlperng

可恃性管理的概念是由可靠度管理擴展而產生。1965 年，國際電工委員會 56 號技術委員會 (IEC/TC 56)「可靠度 (Reliability)」，在日本東京成立，並朝開第一次委員會議。1969 年發行 IEC 300: 可靠度管理觀點 (Manageraial aspects of reliability) 國際標準。1984 年，IEC/TC 56 整合可靠度與維護度，將技術委員會更名為「可靠度與維護度」，發行 IEC 300: 可靠度與維護度管理 (Reliability and Maintainability Management) 國際標準。 1989 年，IEC/TC 技術委員會再次更名為「可恃性 (Dependability)」，取代原有的「可靠度與維護度」。1987 年，國際標準化組織發行 ISO 9000 品質管理國際標準系列。1993 年發行 IEC 300 可恃性管理 (Dependability Management) 系列國際標準。
1997 年 IEC 與 ISO 達成協議，將國際標準編號統一為 5 碼系統，並且約定 IEC 原有國際標準編號調整為 6 字頭系列，例如 IEC 300 改為 IEC 60300、IEC 68 改為 IEC 60068，以此類推。
國際電工委員會 IEC/TC 56 《可恃性》技術委員會負責可恃性國際標準系列的發展與維護工作，主要的標準包括：

• IEC 60300-1, Dependability management - Part 1: Dependability programme management
  
  • IEC 60300-1:2024-ed04, Part 1: Managing dependability
  • IEC 60300-1:2014-ed03, Part 1: Guidance for management and application
  • IEC 60300-1:2003-ed02, Part 1: Dependability programme management
  • IEC 60300-1:1993-ed01, Part 1: Dependabilty programme management
    
• IEC 60300-2, Dependability management - Part 2: Dependability programme elements and tasks
  
  • IEC 60300-2:2014, Replaced by IEC 60300-1。
  • IEC 60300-2:2004, Part 2: Guidelines for dependability management
  • IEC 60300-2:1995, Part 2: Dependability programme elements and tasks
    
• IEC 60300-3-1:1991, Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
• IEC 60300-3-1:2003, Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology
• IEC 60300-3-2:1993, Dependability management - Part 3: Application guide - Section 2: Collection of dependability data from the field
• IEC 60300-3-2:2004, Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
• IEC 60300-3-3:1996, Dependability management - Part 3: Application guide - Section 3: Life cycle costing
• IEC 60300-3-3:2004, Dependability management - Part 3-3: Application guide - Life cycle costing
• IEC 60300-3-4:1996, Dependability management - Part 3: Application guide - Section 4: Guide to the specification of dependability requirements
• IEC 60300-3-4:2007, Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
• IEC 60300-3-5:2001, Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
• IEC 60300-3-6:1997, Dependability management - Part 3: Application guide - Section 6: Software aspects of dependability
• IEC 60300-3-7:1999, Dependability management - Part 3-7: Application guide - Reliability stress screening of electronic hardware
• IEC 60300-3-9:1995, Dependability management - Part 3: Application guide - Section 9: Risk analysis of dependability programme
• IEC 60300-3-10:2001, Dependability management - Part 3-10: Application guide - Maintainability
• IEC 60300-3-11:1999, Dependability management - Part 3-11: Application guide - Reliability centered maintenance
• IEC 60300-3-11:2009, Dependability management - Part 3-11: Application guide - Reliability centered maintenance
• IEC 60300-3-12:2001, Dependability management - Part 3-12: Application guide - Integrated logistic support
• IEC 60300-3-12:2011, Dependability management - Part 3-12: Application guide - Integrated logistic support
• IEC 60300-3-14:2004, Dependability management - Part 3-14: Application guide - Maintenance and maintenance support
• IEC 60300-3-15:2009, Dependability management - Part 3-15: Application guide - Engineering of system dependability
• IEC 60300-3-16:2008, Dependability management - Part 3-16: Application guide - Guidelines for specification of maintenance support services
• IEC 60319:1999, Presentation and specification of reliability data for electronic components
• IEC 60605-1:1978, Equipment reliability testing - Part 1: General requirements
• IEC 60605-2:1994, Equipment reliability testing - Part 2: Design of test cycles
• IEC 60605-3-1:1986, Equipment reliability testing - Part 3: Preferred test conditions - Indoor portable equipment - Low degree simulation
• IEC 60605-3-2:1986, Equipment reliability testing - Part 3: Preferred test conditions - Equipment for stationary use in weatherprotected locations - High degree of simulation
• IEC 60605-3-3:1992, Equipment reliability testing - Part 3: Preferred test conditions - Section 3: Test cycle 3: Equipment for stationary use in partially weatherprotected locations - Low degree of simulation
• IEC 60605-3-4:1994, Equipment reliability testing - Part 3: Preferred test conditions - Section 4: Test cycle 4: Equipment for portable and non-stationary use - Low degree of simulation
• IEC 60605-3-5:1996, Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
• IEC 60605-3-6:1996, Equipment reliability testing - Part 3: Preferred test conditions - Section 6: Test cycle 6: Outdoor transportable equipment - Low degree of simulation
• IEC 60605-4:2001, Equipment reliability testing - Part 4: Statistical procedure for Exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
• IEC 60605-6:2007, Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
• IEC 60706-1, Guide on maintainability of equipment - Part 1: Section 1, 2 and 3. Introduction, requirements and maintainability programme (withdrawn)
• IEC 60706-2:2006, Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development Phase
• IEC 60706-3:2006, Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data
• IEC 60706-4, Guide on maintainability of equipment - Part 4: Section 8: Maintenace and maintenace support planning (withdrawn)
• IEC 60706-5:2007, Maintainability of equipment - Part 5: Testability and diagnostic testing
  

從技術觀點，物品的屬性包括實體面的可恃性 (dependability) 與虛體面的資安性或保全性 (security)，可恃性 = RAMS、資安性 = CIA，總共有 6 項基本屬性。可恃性指的是東西可以有恃無恐，資安性不怕外來的入侵與破壞。