ISO 統計相關標準

hlperng

國際標準化組織第 69 技術委員會 (ISO/TC 69) 「統計方法應用技術委員會」負責準備與維護統計技術與統計方法相關國際標準，ISO/TC 69 ，轄下有六個分技術委員會 (subcommittees, SC)：

• ISO/TC 69/SC 1: Terminology and symbols
• ISO/TC 69/SC 4: Applications of statistical methods in product and process management
• ISO/TC 69/SC 5: Acceptance sampling
• ISO/TC 69/SC 6: Measurement methods and results
• ISO/TC 69/SC 7: Applications of statistical and related techniques for the implementation of Six Sigma
• ISO/TC 69/SC 8: Application of statistical and related methodology for new technology and product development
  

ISO/TC 69/SC 4 在 2003 年發行的 ISO/TR 13425:2003 將統計學標準分為技術 (technology)、描述 (describe)、解釋 (explain)、允收 (accept) 、比較 (compare)、量測控制 (measurement control)、後續時間或時間變化 (follow in time)等類別，其關係及相對國際標準如下圖所示。2006 年 ISO/TR 13425 改版，增加了一些新的或改版的相關統計學國際標準，如下圖所示：



(source: ISO/TR 13425:2006)



(source: ISO/TR 13425:2003)


統計技術與統計方法指導綱要：

• ISO 10017:2003, Guidance on statistical techniques for ISO 9001:2000 (ISO 9001:2000 統計技術指導綱要)
• ISO/TR 13425:1995 (ed1.0), Guide for the selection of statistical methods in standardization and specification (withdrawn and replaced by ISO/TR 13425:2003)
• ISO/TR 13425:2003 (ed2.0), Guidelines for the selection of statistical methods in standardization and specification (withdrawn and replaced by ISO/TR 13425:2006)
• ISO/TR 13425:2006 (ed3.0), Guidelines for the selection of statistical methods in standardization and specification (2011年撤銷)
• ISO/TR 13519:2012 (ed1.0), Guidance on the development and use of ISO statistical publications spported by software
• ISO/TR 18532:2009 (ed1.0), Guidance on the application of statistical methods to quality and to industrial standardization
  

名詞與定義 (ISO/TC 69/SC 1 Terminology and symbols)：

• ISO 3534-1:1993 (ed1.0), Statistics - Vocabulary and symbols - Part 2: Probability and general statistical terms (58 pages) (revised by ISO 3534-1:2006)
• ISO 3534-1:2006 (ed2.0), Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability (116 pages)
• ISO/NP 3534-1:201x (ed3.0), Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability
• ISO 3534-2:1993 (ed1.0), Statistics - Vocabulary and symbols - Part 2: Statistical quality control (44 pages) (revised by ISO 3534-2:2006)
• ISO 3534-2:2006 (ed2.0), Statistics - Vocabulary and symbols - Part 2: Applied statistics (134 pages)
• ISO 3534-3:1985 (ed1.0), Statistics - Vocabulary and symbols - Part 3: Design of experiments (46 pages) (revised by ISO 3534-3:1999)
• ISO 3534-3:1999 (ed2.0), Statistics - Vocabulary and symbols - Part 3: Design of experiments (56 pages) (revised by ISO 3534-3:2013)
• ISO 3534-3:2013 (ed3.0), Statistics - Vocabulary and symbols - Part 3: Design of experiments (110 pages)
• ISO 3534-4:2014 (ed1.0), Statistics - Vocabulary and symbols - Part 4: Survey sampling (43 pages)
  

資料統計詮釋與描述： (ISO/TC 69 Applications of statistical methods)

• ISO 2602:1980 (ed1.0), Statistical interpretation of test results - Estimation of the mean - Confidence interval (will be replaced by ISO/CD 16295-5:2016)
• ISO 2854:1976 (ed1.0), Statistical interpretation of data - Techniques of estimation and tests relating to means and variances (will be replaced by ISO/CD 16295-5:2016)
• ISO 3207:1975 (ed1.0), Statistical interpretation of data - Determination of a statistical tolerance interval (replaced by ISO 16269-6:2005)
• ISO 3301:1975 (ed1.0), Statistical interpretation of data - Comparison of two means in the case of paired observations  (will be replaced by ISO/CD 16295-5:2016)
• ISO 3494:1976 (ed1.0), Statistical interpretation of data - Power of tests relating to means and variances (will be replaced by ISO/CD 16295-5:2016)
• ISO 5479:1997 (ed1.0), Statistical interpretation of data - Tests for departure from the normal distribution (will be replaced by ISO/DIS 16269-3:2017)
• ISO 11453:1996 (ed1.0), Statistical interpretation of data - Tests and confidence intervals relating to proportions (will be replaced by ISO/DIS 16269-2:2017)
• ISO/DIS 16269-2:2017 (ed1.0), Statistical interpretation of data - Part 2: Tests and confidence intervals relating to proportions
• ISO/DIS 16269-3:2017 (ed1.0), Statistical interpretation of data - Part 3: Tests for departure from the normal distribution
• ISO 16269-4:2010 (ed10), Statistical interpretation of data - Part 4: Detection and treatment of outliers
• ISO/CD 16269-5:2017, Statistical interpretation of data - Part 5: Estimation and tests of means and variances in the normal distribution with power functions for tests
• ISO 16269-6:2005 (ed1.0), Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals (revised by ISO 16269-6:2014)
• ISO 16269-6:2014 (ed2.0), Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals
• ISO 16269-7:2001 (ed1.0), Statistical interpretation of data - Part 7: Median - Estimation and confidence intervals
• ISO 16269-8:2004 (ed1.0), Statistical interpretation of data - Part 8: Determination of prediction intervals
  

• ISO 24153:2009 (ed1.0), Random sampling and randomization procedures
• ISO 28640:2010 (ed1.0), Random variate generation methods
  

抽樣與抽樣系統: (ISO/TC 69/SC 5)

• ISO/TR 8550:1994 (ed1.0), Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discre items in lots (revised by ISO/TR 8550-1:2007)
• ISO/TR 8550-1:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling
• ISO/TR 8550-2:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes
• ISO/TR 8550-3:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 3: Sampling by variables
• ISO 13448-1:2005 (ed1.0), Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach (replaced by ISO 28587-1:2017)
• ISO 21247:2005 (ed1.0), Combined accept-zero sampling systems and process control procedures for product acceptance (revised by ISO 28594:2017)
• ISO 24153:2009 (ed1.0), Random sampling and randomization procedures
• ISO 28594:2017 (ed1.0), Combined accept-zero sampling systems and process control procedures for product acceptance
• ISO 28598-1:2017 (ed1.0), Acceptance sampling procedures based on the allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach
• ISO 28598-2:2017 (ed1.0), Acceptance sampling procedure based on the allocation of priorities principle (APP) - Part 2; Coordinated single sampling plans for acceptance sampling by attributes
  

計數型抽樣計畫：(ISO/TC 69/SC 5 Acceptance Sampling)

• ISO 2859-0:1995 (ed1.0), Sampling procedures for inspection by attributes - Part 0: Introduction to the ISO 2859 attribute sampling system (replaceed by ISO 2859-10:2006)
• ISO 2859-1:1989 (ed1.0), Sampling procedures for inspection by attributes - Part 1: Sampling plans indexed by acceptance quality level (AQL) for lot-by-lot inspection (revised by ISO 2859-1:1999)
• ISO 2859-1:1999 (ed2.0), Sampling procedures for inspection by attributes - Part 1: Smapling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• ISO 2859-2:1985 (ed1.0), Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
• ISO/AWI 2859-2:2015 (ed2.0), Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
• ISO 2859-3:1991 (ed1.0), Sampling procedures for inspection by attributes - Part 3: Skip-lot sampling procedures (revised by ISO 2859-3:2005)
• ISO 2859-3:2005 (ed2.0), Sampling procedures for inspection by attributes - Part 3: Skip-log sampling procedures
• ISO 2859-4:1999 (ed1.0), Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of stated quality levels (revised by ISO 2859-4:2002)
• ISO 2859-4:2002 (ed2.0), Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
• ISO/AWI 2859-4:2015 (ed3.0), Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
• ISO 2859-5:2005 (ed1.0),  Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• ISO 2859-10:2006 (ed1.0), Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes (replaced by ISO 28590:2017)
• ISO 8422:2006 (ed2.0), Sequential sampling plans for inspection by attributes (replaced by ISO 28591:2017)
• ISO/TR 8550-2:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 2: Sampling by attributes
• ISO 13448-2:2004 (ed1.0), Acceptance sampling procedures based on the allocation of priorities principles (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by atributes (revised by ISO 28498-2:2017)
• ISO 14560:2004 (ed1.0), Acceptance sampling procedures by attributes - Specified quality levels in nonconforming item per million (revised by ISO 28597:2017) (= MS ISO 14560:2006)
• ISO 18414:2006 (ed1.0), Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (revised by ISO 28593:2017)
• ISO 21247:2005 (ed1.0), Combined accept-zero sampling systems and process control procedures for product acceptance (revised by ISO 28594:2017)
• ISO 28590:2017 (ed1.0), Sampling procedures for inspection by attributes - Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
• ISO 28591:2017 (ed1.0), Sequential sampling plans for inspection by attributes
• ISO 28593:2017 (ed1.0), Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality
• ISO 28597:2017 (ed1.0), Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
• ISO 28598-2:2017 (ed1.0), Acceptance sampling procedures based on the allocation of priorities principles (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attrbutes
  

計量型抽樣計畫：(ISO/TC 69/SC 5 Acceptance sampling)

• ISO 3951-1:2005 (ed1.0), Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (revised by ISO 3951-1:2013)
• ISO 3951-1:2013 (ed2.0), Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
• ISO 3951-2:2006 (ed1.0), Sampling procedures for inspection by variables - Part 2: General specifications for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics (revised by ISO 3951-2:2013)
• ISO 3951-2:2013 (ed2.0), Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
• ISO 3951-3:2007 (ed1.0), Sampling procedures for inspection by variables - Part 3: Specification for double sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
• ISO 3951-4:2011 (ed1.0), Sampling procedures for inspection by variables - Part 4: Sequential sampling plans for inspection by variables - Known standard deviation
• ISO 3951-5:2006, Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (Known standard deviation)
• ISO 8422:2006, Sequential sampling plans for inspection by attributes
• ISO 8423:2008, Sequential sampling plans for inspection by attributes for percent nonconforming (known standard deviation)
• ISO/TR 8550-3:2007 (ed1.0), Guidance on the selection and usage of acceptance sampling sysems for inspection of discrete items in lots - Part 3: Sampling by variables
  

散裝物料 (bulk materials) 抽樣計畫：(ISO/TC 69/SC 6 Measurement methods and results)

• ISO 10725:2000 (ed1.0), Acceptance sampling plans and procedures for the inspection of bulk materials
• ISO 11648-1:2003 (ed1.0), Statistical aspects of sampling from bulk materials - Part 1: General principles
• ISO 11648-2:2001 (ed1.0), Statistical aspects of sampling from bulk materials - Part 2: Sampling of particulate materials  (MS ISO 11648-2:2004 = ISO 11648-2:2001)
  

控制圖(或管制圖) (ISO/TC 69/SC 4 Applications of statistical methods in product and process management)：

• ISO 7870:1993 (ed1.0), Control charts - General guide and introduction (withdrawn and revised by ISO 7870-1:2007 on 2007-12-05)
• ISO 7870-1:2007 (ed1.0), Control charts - Part 1: General guidelines (withdrawn and revised by ISO 7870-1:2014 on 2014-01-22)
• ISO 7870-1:2014 (ed2.0), Control charts - Part 1: General guidelines
• ISO/DIS 7870-1:2016 (ed3.0), Control charts - Part 1: General guidelines (under development)
• ISO 7870-2:2013 (ed1.0), Control charts - Part 2: Shewhart control charts
• ISO 7870-3:2012 (ed1.0), Control charts - Part 3: Acceptance control charts
• ISO 7870-4:2011 (ed1.0), Control charts - Part 4: Cumulative sum charts
• ISO 7870-5:2014 (ed1.0), Control charts - Part 5: Specialized control charts
• ISO 7870-6:2016 (ed1.0), Control charts - Part 6: EWMA control charts
• ISO/CD 7870-7:2016 (ed1.0), Control charts - Part 7: Multivariate control charts (under development)
• ISO 7870-8:2017 (ed1.0), Control charts - Part 8: Charting techniques for short runs and small mixed batches
• ISO/CD 7870-9:2017 (ed1.0), Control charts - Part 9: Control charts for autocorrelated processes
• ISO/TR 7871:1997 (ed1.0), Cumulative sum charts - Guidance on quality control and data analysis using CUSUM techniques (replaced by ISO 7870-4:2011)
• ISO 7873:1993 (ed1.0), Control charts for arithmetic with warning limits (withdrawn on 2014-12-10)
• ISO 7966:1993 (ed1.0), Acceptance control charts (replaced by ISO 7870-3:2012)
• ISO 8258:1991 (ed1.0), Shewhart control charts (replaced by ISO 7870-2:2013)
  

統計過程控制 (SPC) (ISO/TC 69/SC 4 Applications of statistical methods in product and process management)

• ISO 11462-1:2001 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 1: Elements of SPC
• ISO 11462-2:2010 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 2: Catalogue of tools and techniques
• ISO/DTR 11462-3:2017 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 3: Reference data set for SPC software validation
• ISO/NP TR 11462-4:2017 (ed1.0), Guidelines for implementation of statistical process control (SPC) - Part 4: Reference data sets for measurement process analysis software validation
• ISO/NP TR 11462-5:2017 (ed1.0), Guidelines for implementation of statatical process control (SPC) - Part 5: Quality data exchange format for SPC software
  

過程管理統計方法 - 能力與績效 (Capability and performance) (ISO/TC 69/SC 4)

• ISO 21747:2006 (ed1.0), Statistical methods - Process performance and capability statistics for measured quality characteristics (revised by ISO 22514-2:2013)
• ISO 22514-1:2009 (ed1.0), Statistical methods in process management - Capability and performance - Part 1: General principles and concepts (revised by ISO 22514-1:2014)
• ISO 22514-1:2014 (ed2.0), Statistical methods in process management - Capability and performance - Part 1: General principles and concepts
• ISO 22514-2:2013 (ed1.0), Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models (revised by ISO 22514-2:2017)
• ISO 22514-2:2017 (ed2.0), Statistical methods in process management - Capability and performance - Part 2: Process capability and performance of time-dependent process models
• ISO 22514-3:2008 (ed1.0), Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
• ISO/CD 22514-3:2017, Statistical methods in process measurement - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
• ISO/TR 22514-4:2007 (ed1.0), Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures (replaced by ISO 22514-4:2016)
• ISO 22514-4:2016 (ed1.0), Statistical methods in process management - Capability and performance - Part 4: Process capability estimates and performance measures
• ISO/DIS 22514-5:2015 (ed1.0), Statistical methods in process management - Capability and performance - Part 5: Process capability estimates and performance for atributive characteristics
• ISO 22514-6:2013 (ed1.0), Statistical methods in process management - Capability and performance - Part 6: Process capability statistics for characteristics following a multivariate normal distribution
• ISO 22514-7:2012 (ed1.0), Statistical methods in process management - Capability and performance - Part 7: Capability of measurement processes
• ISO 22514-8:2014 (ed1.0), Statistical methods in process management - Capability and performance - Part 8: Machine performance of a multi-state production process
• ISO/CD TR 22514-9 (ed1.0), Statistical methods in process management - Capability and performance - Part 9: Process capability statistics for characterisitics defined by geoetrical specification (GPS)
  

六西格瑪 (six sigma) (ISO/TC 69/SC 7)

• ISO 13053-1:2011 (ed1.0), Quantitative methods in process improvement - Six sigma - Part 1: DMAIC mehtodology
• ISO 13053-2:2011 (ed1.0), Quantitative methods in process improvement - Six sigma - Part 2: Tools and techniques
• ISO/TR 13195:2015 (ed1.0), Selected illustrations of response surface method - Central composite design
• ISO/TR 14468:2010 (ed1.0), Selected illustrations of attribute agreement analysis
• ISO/TR 16705:2016 (ed1.0), Statistical methods for implementation of Six Sigma - Selected illustrations of contingency table analysis
• ISO 17258:2015 (ed1.0), Statistical methods - Six Sigma - Basic criteria underlying benchmarking for Six Sigma in organizations
• ISO 18404:2015 (ed1.0), Quantitative methods in process improvement - Six sigma - Cometencies for key personnel and their organizations in relation to Six Sigma and Lean implementation
• ISO/CD 20575-1:2016 (ed1.0), Statistical and probabilistic methods in the development of products, processes and services - Design for Six Sigma - Part 1: DfSS Framework
• ISO/AWI TR 20693:2015 (ed1.0), Statistical methods for implementation of Six Sigma - Selected illustrations of distribution identification studies
  

實驗設計 (DOE) (ISO/TC 69/SC 1 + ISO/TC 69/SC 7)

• ISO 3534-3:2013 (ed3.0), Statistics - Vocabulary and symbols - Part 3: Design of experiments
• ISO/TR 12845:2010 (ed1.0), Selected illustrations of fractional factorial screening experiment
• ISO/TR 29901:2007 (ed1.0), Selected illustrations of full factorial experiments with four factors
  

新技術與產品開發過程 (ISO/TC 69/SC 8 Application of statistical and related methodology for new technology and product development)

• ISO 16336:2014 (ed1.0), Application of statistical and related methods to new technology and product development process - Rubust paramter design (RPD)
• ISO/AWI 16337:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Robust Tolerance Design (RTD)
• ISO 16355-1:2015 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 1: Genernal principle and perspective of QFD method
• ISO 16355-2:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 2: Acquisition of Non-quantitative VOC or VOS
• ISO/DIS 16355-3:2018 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 3: Acquisition of Non-quantitative and quantitative VOC/VOS
• ISO 16355-4:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 4: Analysis of non-quantitative and quantitative VOC/VOS
• ISO 16355-5:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 5: Solution strategy
• ISO/AWI TR 16355-6:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 6: Optimization - Robust parameter design
• ISO 16355-7, Application of statistical and related methods to new technology and product development process - Part 7: Optimization - Tolerance design and output to manufacturing (proposal withdrawl and use ISO 16337)
• ISO/TR 16355-8:2017 (ed1.0), Application of statistical and related methods to new technology and product development process - Part 8: Guidelines for commercialization and life cycle
  

量測方法與結果及偵測能力 (ISO/TC 69/SC 6 Measurement methods and results)

• ISO 5725:1986 (ed1.0), Precision of test methods - Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests (replaced by ISO 5725-1:1994, ISO 5724-2:1994, ISO 5725-3:1994, ISO 5725-4:1994, ISO 5725-5:1998, and ISO 5725-6:1994)
• ISO 5725-1:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and resultsl - Part 1: General principles and definitions (will be revised by ISO/AWI 5725-1:2015)
• ISO/AWI 5725-1:2015 (ed2.0), Accuracy (trueness and precision) of measurement methods and resultls - Part 1: General principles and definitions
• ISO 5725-2:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and results) - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (will be revised by ISO/AWI 5725-2:2015 (ed2.0))
• ISO/AWI 5725-2:2015 (ed2.0), Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method)
• ISO 5725-3:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
• ISO 5725-4:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (will be revised by ISO/CD 5725-4:2016 (ed2.0))
• ISO/CD 5725-4:2016 (ed2.0), Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
• ISO 5725-5:1998 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
• ISO 5725-6:1994 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
• ISO 10576-1:2003 (ed1.0), Statistical methods - Guidelines for the evaluation of conformity with specified requirements - Part 1: General principles
• ISO 11095:1996 (ed1.0), Linear calibration using reference materials
• ISO 11843-1:1997 (ed1.0), Capability of detection - Part 1: Terms and definitions
• ISO 11843-2:2000 (ed1.0), Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000 Technical Corr. 2007)
• ISO 11843-3:2003 (ed1.0), Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used
• ISO 11843-4:2003 (ed1.0), Capability 0f detection - Part 4: Methodology for comparing the minimum detectable value with a given value
• ISO 11843-5:2008 (ed1.0), Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
• ISO 11843-6:2013 (ed1.0), Capability of detection - Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
• ISO 11843-7:2012 (ed1.0), Capability of detection - Part 7: Methodology based on stochastic properties of insturmental noise
• ISO/TR 12888:2011 (ed1.0), Selected illustrations of gauge repeatability and reproducibility studies
• ISO/TR 13195:2015 (ed1.0), Selected illustrations of response surface method - Central composite design
• ISO 13528:2005 (ed1.0), Statistical methods for use in proficiency testing by interlaboratory comparison (revised by ISO 13528:2015)
• ISO 13528:2015 (ed2.0), Statistical methods for use in proficiency testing by interlaboratory comparison
• ISO/TR 13587:2012 (ed1.0), Three statistical approaches for the assessment and interpretation of measurement uncertainty
• ISO/TR 14468:2010 (ed1.0), Selected illustrations of attribute agreement analysis
• ISO/TS 17503:2015 (ed1.0), Statistical methods of uncertainty evaluation - Guidance on evaluation of uncertainty using two-factor crossing designs
• ISO 21748:2010 (ed1.0), Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation (revised by ISO 21748:2017)
• ISO 21748:2017 (ed2.0), Guidance for the use of repeatability, reporducibility and trueness estimates in measurement uncertainty evaluation
• ISO/TS 21749:2005 (ed1.0), Measurement uncertainty for metrological applications - Repeated measurements and nested experiments
• ISO/TR 22971:2005 (ed1.0), Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementating and statistically analysing interlaboratory repeatability and reproducibility results
• ISO/TS 28037:2010 (ed1.0), Determination and use of straight-line calibration functions
• ISO/DTS 28038:2017 (ed1.0), Determination and use of polynomial calibration functions
  

時間變化 (Follow in Time)：可靠度 (reliability) 與演變 (evolution)

• IEC 60410:1973, Sampling plans and procedures for inspection by attributes
• IEC 60605-4:2001, Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals
• IEC 60605-6:2007, Equipment reliability testing - Part 6: Tests for the validity and estimation of constant failure rate and constant failure intensity
  

• IEC 60706-6-9:1994, Guide on maintainability of equipment - Part 6: Section 9: Statistical methods in maintainability evaluation (withdrawn and replaced by IEC 60706-3:2006)
• IEC 61070:1991, Compliance test procedures for steady-state availability
• IEC 61123:1991, Reliability testing - Compliance test plans for success ratio
• IEC 61164:2004, Reliabilitiy growth - Statistical test and estimation mehtods
• IEC 61649:2008, Weibull analysis
• IEC 61710:2000, Power law model - Goodness-of-fit tests and estimation methods